The RB is the Open-source Aviation instruments suite, the models are divided by CPU/Features. RB-02 RB-05 will run in ESP32 (Arduino).

• RB-01 -> Display with Synthetic vision, Autopilot and ADSB
• RB-02 -> Display with SixPack (this repo)
• RB-03 -> Display with Autopilot, ADSB, Radio, Flight Computer
• RB-04 -> Display with EMS: Engine monitoring system
• RB-05 -> Display with Stratux BLE Traffic (this repo)
• RB-06 -> Display with Android

Compatibility

• ESP32-S3-Touch-LCD-2.8C
• ESP32-S3-Touch-LCD-2.1C
• ESP32-S3-LCD-2.8C

Bugfix

1. Black screen

Known Bug

1. Pitch/Roll/Yaw labels are misaligned
2. On non Touch display the RB-05 starts from traffic list

Changes

1. Panel alignment: very important if you see any bug record a video and post on discord community, set panel alignment to 0 to disable this feature

RB-02 Features

Warning: since the version 1.1.19 a SDCard is recommended due to resources loaded externally.

1. Customisable splash screen (image that can be displayed when ever you want)
2. GPS Speed, with KMH or KT configuration and colored arcs
3. Attitude indicator GPS Assisted
4. Altimeter with QNH settings
5. Altimeter digital with GPS Altimeter comparation
6. Slip & Turn with degree indicator
7. Gyro based on Gyroscope assisted with GPS Track
8. GPS Map based on BMP Tiles MapBox, you can load your map in the SDCard
9. Variometer
10. G-Meter with Max-Negative stored
11. Timers: up to 3 timers with GPS UTC Clock
12. Checklist loaded from SDCard

RB-04 Features

Not available in this release, use the pereviews

1. EGT
2. CHT

RB-05 Features

1. Radar
2. Traffic list
3. Compatible with Stratux BLE device

Requirements

• Supported Display Devices are 2.8 and 2.1:
• https://www.waveshare.com/wiki/ESP32-S3-Touch-LCD-2.8C
• https://www.waveshare.com/wiki/ESP32-S3-Touch-LCD-2.1
• Barometer Device: BMP280 or similar
• Flashing tool: https://www.waveshare.com/wiki/Flash_Firmware_Flashing_and_Erasing
• Case: you can find the STL on wiki
• GPS: any TTL NMEA GPS with $GPRMC such as uBlox NEO M6N and up
• SDCard max 32gb

Installation

Please read the installation Wiki: to make it working the aircraft profile shall be correctly loaded in the setup.
We added a "vibration" correction setup: please verify with your mechanic which is the best options.

Video

• https://www.youtube.com/watch?v=gP9TrgqlwbQ
• https://www.youtube.com/watch?v=9aCub_4hdxs
• https://www.youtube.com/watch?v=8FwM3qiaDVQ
• https://www.youtube.com/watch?v=Gy3Yu2zPZRM

Flasher setup

• chip esp32s3
• flash_mode dio
• flash_size 16MB
• 0x0 Application Binary

If you have problems check Youtube guides and try a "full clear" during flash
If you have black screen read here: https://github.com/xiaprojects/rb-esp/wiki/Troubleshooting

How to ask Support

1. Read all the Wiki documents
2. Verity in open and closed isses if the problem is already mentioned
3. Check in table below if there some workaround
4. Ask to the community --> Donate a coffee

Community support

Community support is free and is in Discord Channel

COMMUNITY Edition Disclaimer

By installing or using this device and software, you acknowledge and agree to the following:

1. Risk of Use: The use of this device and software is at your own risk. The manufacturer and developers are not liable for any damage to your system, data, or any other losses arising from the installation, usage, or inability to use the device or software.
2. Warranty Disclaimer: This device and software are provided "as-is," without any express or implied warranties, including but not limited to the implied warranties of merchantability or fitness for a particular purpose. No guarantee is provided regarding the performance, functionality, or compatibility of the device and software.
3. Compliance: It is your responsibility to ensure compliance with all applicable laws, regulations, and safety standards in your region during installation and use of the device and software.
4. Liability Limitation: In no event will the manufacturer or software developer be liable for any direct, indirect, incidental, special, consequential, or punitive damages, including loss of data, business interruption, or loss of profits, arising from the use or inability to use the device or software.

The RB is the Open-source Aviation instruments suite, the models are divided by CPU/Features. RB-02 RB-05 will run in ESP32 (Arduino).

• RB-01 -> Display with Synthetic vision, Autopilot and ADSB
• RB-02 -> Display with SixPack (this repo)
• RB-03 -> Display with Autopilot, ADSB, Radio, Flight Computer
• RB-04 -> Display with EMS: Engine monitoring system
• RB-05 -> Display with Stratux BLE Traffic (this repo)
• RB-06 -> Display with Android

Compatibility

• ESP32-S3-Touch-LCD-2.8C
• ESP32-S3-Touch-LCD-2.1C
• ESP32-S3-LCD-2.8C

Bugfix

1. Non touch screen startup screen

Known Bug

1. Black screen will be solved soon

Changes

1. Panel alignment: very important if you see any bug record a video and post on discord community, set panel alignment to 0 to disable this feature

RB-02 Features

Warning: since the version 1.1.19 a SDCard is recommended due to resources loaded externally.

1. Customisable splash screen (image that can be displayed when ever you want)
2. GPS Speed, with KMH or KT configuration and colored arcs
3. Attitude indicator GPS Assisted
4. Altimeter with QNH settings
5. Altimeter digital with GPS Altimeter comparation
6. Slip & Turn with degree indicator
7. Gyro based on Gyroscope assisted with GPS Track
8. GPS Map based on BMP Tiles MapBox, you can load your map in the SDCard
9. Variometer
10. G-Meter with Max-Negative stored
11. Timers: up to 3 timers with GPS UTC Clock
12. Checklist loaded from SDCard

RB-04 Features

1. EGT
2. CHT (to be tested)

RB-05 Features

1. Radar
2. Traffic list
3. Compatible with Stratux BLE device

Requirements

• Supported Display Devices are 2.8 and 2.1:
• https://www.waveshare.com/wiki/ESP32-S3-Touch-LCD-2.8C
• https://www.waveshare.com/wiki/ESP32-S3-Touch-LCD-2.1
• Barometer Device: BMP280 or similar
• Flashing tool: https://www.waveshare.com/wiki/Flash_Firmware_Flashing_and_Erasing
• Case: you can find the STL on wiki
• GPS: any TTL NMEA GPS with $GPRMC such as uBlox NEO M6N and up
• SDCard max 32gb

Installation

Please read the installation Wiki: to make it working the aircraft profile shall be correctly loaded in the setup.
We added a "vibration" correction setup: please verify with your mechanic which is the best options.

Video

• https://www.youtube.com/watch?v=gP9TrgqlwbQ
• https://www.youtube.com/watch?v=9aCub_4hdxs
• https://www.youtube.com/watch?v=8FwM3qiaDVQ
• https://www.youtube.com/watch?v=Gy3Yu2zPZRM

Flasher setup

• chip esp32s3
• flash_mode dio
• flash_size 16MB
• 0x0 bootloader.bin => Optional if you came from existing Waveshare demo or RB Avionics
• 0x10000 Application Binary
• 0x8000 partition-table.bin => Optional if you came from existing RB Avionics

If you have problems check Youtube guides and try a "full clear" during flash
If you have black screen read here: https://github.com/xiaprojects/rb-esp/wiki/Troubleshooting

How to ask Support

1. Read all the Wiki documents
2. Verity in open and closed isses if the problem is already mentioned
3. Check in table below if there some workaround
4. Ask to the community --> Donate a coffee

Community support

Community support is free and is in Discord Channel

COMMUNITY Edition Disclaimer

By installing or using this device and software, you acknowledge and agree to the following:

1. Risk of Use: The use of this device and software is at your own risk. The manufacturer and developers are not liable for any damage to your system, data, or any other losses arising from the installation, usage, or inability to use the device or software.
2. Warranty Disclaimer: This device and software are provided "as-is," without any express or implied warranties, including but not limited to the implied warranties of merchantability or fitness for a particular purpose. No guarantee is provided regarding the performance, functionality, or compatibility of the device and software.
3. Compliance: It is your responsibility to ensure compliance with all applicable laws, regulations, and safety standards in your region during installation and use of the device and software.
4. Liability Limitation: In no event will the manufacturer or software developer be liable for any direct, indirect, incidental, special, consequential, or punitive damages, including loss of data, business interruption, or loss of profits, arising from the use or inability to use the device or software.

The RB is the Open-source Aviation instruments suite, the models are divided by CPU/Features. RB-02 RB-05 will run in ESP32 (Arduino).

• RB-01 -> Display with Synthetic vision, Autopilot and ADSB
• RB-02 -> Display with SixPack (this repo)
• RB-03 -> Display with Autopilot, ADSB, Radio, Flight Computer
• RB-04 -> Display with EMS: Engine monitoring system
• RB-05 -> Display with Stratux BLE Traffic (this repo)
• RB-06 -> Display with Android

Compatibility

• ESP32-S3-Touch-LCD-2.8C
• ESP32-S3-Touch-LCD-2.1C
• ESP32-S3-LCD-2.8C

Bugfix

1. West and East NMEA for Map

Known Bug

1. None

Changes

1. Improved sunlight readbility
2. Workaround panel Pitch alignment for demo purposes (it is not yet ready for aircraft)

RB-02 Features

Warning: since the version 1.1.19 a SDCard is recommended due to resources loaded externally.

1. Customisable splash screen (image that can be displayed when ever you want)
2. GPS Speed, with KMH or KT configuration and colored arcs
3. Attitude indicator GPS Assisted
4. Altimeter with QNH settings
5. Altimeter digital with GPS Altimeter comparation
6. Slip & Turn with degree indicator
7. Gyro based on Gyroscope assisted with GPS Track
8. GPS Map based on BMP Tiles MapBox, you can load your map in the SDCard
9. Variometer
10. G-Meter with Max-Negative stored
11. Timers: up to 3 timers with GPS UTC Clock
12. Checklist loaded from SDCard

RB-05 Features

1. Radar
2. Traffic list
3. Compatible with Stratux BLE device

Requirements

• Supported Display Devices are 2.8 and 2.1:
• https://www.waveshare.com/wiki/ESP32-S3-Touch-LCD-2.8C
• https://www.waveshare.com/wiki/ESP32-S3-Touch-LCD-2.1
• Barometer Device: BMP280 or similar
• Flashing tool: https://www.waveshare.com/wiki/Flash_Firmware_Flashing_and_Erasing
• Case: you can find the STL on wiki
• GPS: any TTL NMEA GPS with $GPRMC such as uBlox NEO M6N and up
• SDCard max 32gb

Installation

Please read the installation Wiki: to make it working the aircraft profile shall be correctly loaded in the setup.
We added a "vibration" correction setup: please verify with your mechanic which is the best options.

Video

• https://www.youtube.com/watch?v=gP9TrgqlwbQ
• https://www.youtube.com/watch?v=9aCub_4hdxs
• https://www.youtube.com/watch?v=8FwM3qiaDVQ
• https://www.youtube.com/watch?v=Gy3Yu2zPZRM

Flasher setup

• chip esp32s3
• flash_mode dio
• flash_size 16MB
• 0x0 bootloader.bin => Optional if you came from existing Waveshare demo or RB Avionics
• 0x10000 Application Binary
• 0x8000 partition-table.bin => Optional if you came from existing RB Avionics

If you have problems check Youtube guides and try a "full clear" during flash
If you have black screen read here: https://github.com/xiaprojects/rb-esp/wiki/Troubleshooting

How to ask Support

1. Read all the Wiki documents
2. Verity in open and closed isses if the problem is already mentioned
3. Check in table below if there some workaround
4. Ask to the community --> Donate a coffee

Community support

Community support is free and is in Discord Channel

COMMUNITY Edition Disclaimer

By installing or using this device and software, you acknowledge and agree to the following:

1. Risk of Use: The use of this device and software is at your own risk. The manufacturer and developers are not liable for any damage to your system, data, or any other losses arising from the installation, usage, or inability to use the device or software.
2. Warranty Disclaimer: This device and software are provided "as-is," without any express or implied warranties, including but not limited to the implied warranties of merchantability or fitness for a particular purpose. No guarantee is provided regarding the performance, functionality, or compatibility of the device and software.
3. Compliance: It is your responsibility to ensure compliance with all applicable laws, regulations, and safety standards in your region during installation and use of the device and software.
4. Liability Limitation: In no event will the manufacturer or software developer be liable for any direct, indirect, incidental, special, consequential, or punitive damages, including loss of data, business interruption, or loss of profits, arising from the use or inability to use the device or software.

The RB is the Open-source Aviation instruments suite, the models are divided by CPU/Features. RB-02 RB-05 will run in ESP32 (Arduino).

• RB-01 -> Display with Synthetic vision, Autopilot and ADSB
• RB-02 -> Display with SixPack (this repo)
• RB-03 -> Display with Autopilot, ADSB, Radio, Flight Computer
• RB-04 -> Display with EMS: Engine monitoring system
• RB-05 -> Display with Stratux BLE Traffic (this repo)

Compatibility

• ESP32-S3-Touch-LCD-2.8C
• ESP32-S3-Touch-LCD-2.1C
• ESP32-S3-LCD-2.8C

Bugfix

1. None

Known Bug

1. None

Changes

1. Improved sunlight readbility

RB-02 Features

Warning: since the version 1.1.19 a SDCard is recommended due to resources loaded externally.

1. Customisable splash screen (image that can be displayed when ever you want)
2. GPS Speed, with KMH or KT configuration and colored arcs
3. Attitude indicator GPS Assisted
4. Altimeter with QNH settings
5. Altimeter digital with GPS Altimeter comparation
6. Slip & Turn with degree indicator
7. Gyro based on Gyroscope assisted with GPS Track
8. GPS Map based on BMP Tiles MapBox, you can load your map in the SDCard
9. Variometer
10. G-Meter with Max-Negative stored
11. Timers: up to 3 timers with GPS UTC Clock
12. Checklist loaded from SDCard

RB-05 Features

1. Radar
2. Traffic list
3. Compatible with Stratux BLE device

Requirements

• Supported Display Devices are 2.8 and 2.1:
• https://www.waveshare.com/wiki/ESP32-S3-Touch-LCD-2.8C
• https://www.waveshare.com/wiki/ESP32-S3-Touch-LCD-2.1
• Barometer Device: BMP280 or similar
• Flashing tool: https://www.waveshare.com/wiki/Flash_Firmware_Flashing_and_Erasing
• Case: you can find the STL on wiki
• GPS: any TTL NMEA GPS with $GPRMC such as uBlox NEO M6N and up
• SDCard max 32gb

Installation

Please read the installation Wiki: to make it working the aircraft profile shall be correctly loaded in the setup.
We added a "vibration" correction setup: please verify with your mechanic which is the best options.

Video

• https://www.youtube.com/watch?v=gP9TrgqlwbQ
• https://www.youtube.com/watch?v=9aCub_4hdxs
• https://www.youtube.com/watch?v=8FwM3qiaDVQ
• https://www.youtube.com/watch?v=Gy3Yu2zPZRM

Flasher setup

• chip esp32s3
• flash_mode dio
• flash_size 16MB
• 0x0 bootloader.bin => Optional if you came from existing Waveshare demo or RB Avionics
• 0x10000 Application Binary
• 0x8000 partition-table.bin => Optional if you came from existing RB Avionics

If you have problems check Youtube guides and try a "full clear" during flash
If you have black screen read here: https://github.com/xiaprojects/rb-esp/wiki/Troubleshooting

How to ask Support

1. Read all the Wiki documents
2. Verity in open and closed isses if the problem is already mentioned
3. Check in table below if there some workaround
4. Ask to the community --> Donate a coffee

Community support

Community support is free and is in Discord Channel

COMMUNITY Edition Disclaimer

By installing or using this device and software, you acknowledge and agree to the following:

1. Risk of Use: The use of this device and software is at your own risk. The manufacturer and developers are not liable for any damage to your system, data, or any other losses arising from the installation, usage, or inability to use the device or software.
2. Warranty Disclaimer: This device and software are provided "as-is," without any express or implied warranties, including but not limited to the implied warranties of merchantability or fitness for a particular purpose. No guarantee is provided regarding the performance, functionality, or compatibility of the device and software.
3. Compliance: It is your responsibility to ensure compliance with all applicable laws, regulations, and safety standards in your region during installation and use of the device and software.
4. Liability Limitation: In no event will the manufacturer or software developer be liable for any direct, indirect, incidental, special, consequential, or punitive damages, including loss of data, business interruption, or loss of profits, arising from the use or inability to use the device or software.

The RB is the Open-source Aviation instruments suite, the models are divided by CPU/Features. RB-02 RB-05 will run in ESP32 (Arduino).

• RB-01 -> Display with Synthetic vision, Autopilot and ADSB
• RB-02 -> Display with SixPack (this repo)
• RB-03 -> Display with Autopilot, ADSB, Radio, Flight Computer
• RB-04 -> Display with EMS: Engine monitoring system
• RB-05 -> Display with Stratux BLE Traffic (this repo)

Compatibility

• ESP32-S3-Touch-LCD-2.8C
• ESP32-S3-Touch-LCD-2.1C
• ESP32-S3-LCD-2.8C

Bugfix

1. None

Known Bug

1. None

Changes

1. Hardware IMU Calibration
2. Postponed routines to improve the "black" screen during boot

RB-02 Features

Warning: since the version 1.1.19 a SDCard is recommended due to resources loaded externally.

1. Customisable splash screen (image that can be displayed when ever you want)
2. GPS Speed, with KMH or KT configuration and colored arcs
3. Attitude indicator GPS Assisted
4. Altimeter with QNH settings
5. Altimeter digital with GPS Altimeter comparation
6. Slip & Turn with degree indicator
7. Gyro based on Gyroscope assisted with GPS Track
8. GPS Map based on BMP Tiles MapBox, you can load your map in the SDCard
9. Variometer
10. G-Meter with Max-Negative stored
11. Timers: up to 3 timers with GPS UTC Clock
12. Checklist loaded from SDCard

RB-05 Features

1. Radar
2. Traffic list
3. Compatible with Stratux BLE device

Requirements

• Supported Display Devices are 2.8 and 2.1:
• https://www.waveshare.com/wiki/ESP32-S3-Touch-LCD-2.8C
• https://www.waveshare.com/wiki/ESP32-S3-Touch-LCD-2.1
• Barometer Device: BMP280 or similar
• Flashing tool: https://www.waveshare.com/wiki/Flash_Firmware_Flashing_and_Erasing
• Case: you can find the STL on wiki
• GPS: any TTL NMEA GPS with $GPRMC such as uBlox NEO M6N and up
• SDCard max 32gb

Installation

Please read the installation Wiki: to make it working the aircraft profile shall be correctly loaded in the setup.
We added a "vibration" correction setup: please verify with your mechanic which is the best options.

Video

• https://www.youtube.com/watch?v=gP9TrgqlwbQ
• https://www.youtube.com/watch?v=9aCub_4hdxs
• https://www.youtube.com/watch?v=8FwM3qiaDVQ
• https://www.youtube.com/watch?v=Gy3Yu2zPZRM

Flasher setup

• chip esp32s3
• flash_mode dio
• flash_size 16MB
• 0x0 bootloader.bin
• 0x10000 Application Binary
• 0x8000 partition-table.bin

If you have problems check Youtube guides and try a "full clear" during flash
If you have black screen read here: https://github.com/xiaprojects/rb-esp/wiki/Troubleshooting

How to ask Support

1. Read all the Wiki documents
2. Verity in open and closed isses if the problem is already mentioned
3. Check in table below if there some workaround
4. Ask to the community --> Donate a coffee

Community support

Community support is free and is in Discord Channel

COMMUNITY Edition Disclaimer

By installing or using this device and software, you acknowledge and agree to the following:

1. Risk of Use: The use of this device and software is at your own risk. The manufacturer and developers are not liable for any damage to your system, data, or any other losses arising from the installation, usage, or inability to use the device or software.
2. Warranty Disclaimer: This device and software are provided "as-is," without any express or implied warranties, including but not limited to the implied warranties of merchantability or fitness for a particular purpose. No guarantee is provided regarding the performance, functionality, or compatibility of the device and software.
3. Compliance: It is your responsibility to ensure compliance with all applicable laws, regulations, and safety standards in your region during installation and use of the device and software.
4. Liability Limitation: In no event will the manufacturer or software developer be liable for any direct, indirect, incidental, special, consequential, or punitive damages, including loss of data, business interruption, or loss of profits, arising from the use or inability to use the device or software.

The RB is the Open-source Aviation instruments suite, the models are divided by CPU/Features. RB-02 will run in ESP32 (Arduino).

• RB-01 -> Display with Synthetic vision, Autopilot and ADSB
• RB-02 -> Display with SixPack (this repo)
• RB-03 -> Display with Autopilot, ADSB, Radio, Flight Computer
• RB-04 -> Display with EMS: Engine monitoring system
• RB-05 -> Display with Stratux BLE Traffic (this repo)

Release for:

• ESP32-S3-Touch-LCD-2.8C
• ESP32-S3-Touch-LCD-2.1C
• ESP32-S3-LCD-2.8C

Bugfix

1. Altimeter when lower than -100ft

Known Bug

1. None

Changes

1. New attitude indicator
2. Speed improvements
3. Stratux traffic display via bluetooth

Features

Warning: since the version 1.1.19 a SDCard is recommended due to resources loaded externally.

1. Customisable splash screen (image that can be displayed when ever you want)
2. GPS Speed, with KMH or KT configuration and colored arcs
3. Attitude indicator GPS Assisted
4. Altimeter with QNH settings
5. Altimeter digital with GPS Altimeter comparation
6. Slip & Turn with degree indicator
7. Gyro based on Gyroscope assisted with GPS Track
8. GPS Map based on BMP Tiles MapBox, you can load your map in the SDCard
9. Variometer
10. G-Meter with Max-Negative stored
11. Timers: up to 3 timers with GPS UTC Clock
12. Checklist loaded from SDCard

Requirements

• Supported Display Devices are 2.8 and 2.1:
• https://www.waveshare.com/wiki/ESP32-S3-Touch-LCD-2.8C
• https://www.waveshare.com/wiki/ESP32-S3-Touch-LCD-2.1
• Barometer Device: BMP280 or similar
• Flashing tool: https://www.waveshare.com/wiki/Flash_Firmware_Flashing_and_Erasing
• Case: you can find the STL on wiki
• GPS: any TTL NMEA GPS with $GPRMC such as uBlox NEO M6N and up
• SDCard max 32gb

Installation

Please read the installation Wiki: to make it working the aircraft profile shall be correctly loaded in the setup.
We added a "vibration" correction setup: please verify with your mechanic which is the best options.

Video

• https://www.youtube.com/watch?v=gP9TrgqlwbQ
• https://www.youtube.com/watch?v=9aCub_4hdxs
• https://www.youtube.com/watch?v=8FwM3qiaDVQ
• https://www.youtube.com/watch?v=Gy3Yu2zPZRM

Flasher setup

• chip esp32s3
• flash_mode dio
• flash_size 16MB
• 0x0 bootloader.bin
• 0x10000 Application Binary
• 0x8000 partition-table.bin

If you have problems check Youtube guides and try a "full clear" during flash

COMMUNITY Edition Disclaimer

By installing or using this device and software, you acknowledge and agree to the following:

1. Risk of Use: The use of this device and software is at your own risk. The manufacturer and developers are not liable for any damage to your system, data, or any other losses arising from the installation, usage, or inability to use the device or software.
2. Warranty Disclaimer: This device and software are provided "as-is," without any express or implied warranties, including but not limited to the implied warranties of merchantability or fitness for a particular purpose. No guarantee is provided regarding the performance, functionality, or compatibility of the device and software.
3. Compliance: It is your responsibility to ensure compliance with all applicable laws, regulations, and safety standards in your region during installation and use of the device and software.
4. Liability Limitation: In no event will the manufacturer or software developer be liable for any direct, indirect, incidental, special, consequential, or punitive damages, including loss of data, business interruption, or loss of profits, arising from the use or inability to use the device or software.

Release for:

• ESP32-S3-Touch-LCD-2.8C
• ESP32-S3-Touch-LCD-2.1C
• ESP32-S3-LCD-2.8C

Bugfix

1. Gyro heading speed improvements
2. Gyro bug fix and label more clear during switch

Known Bug

1. None

Changes

1. Gyro heading fully rewrite
2. Build process is using build machine: if it does not work contact maintainer
3. Enabled dual licensing: COMMUNITY - COMMERCIAL

Features

Warning: since the version 1.1.19 a SDCard is recommended due to resources loaded externally.

1. Customisable splash screen (image that can be displayed when ever you want)
2. GPS Speed, with KMH or KT configuration and colored arcs
3. Attitude indicator GPS Assisted
4. Altimeter with QNH settings
5. Altimeter digital with GPS Altimeter comparation
6. Slip & Turn with degree indicator
7. Gyro based on Gyroscope assisted with GPS Track
8. GPS Map based on BMP Tiles MapBox, you can load your map in the SDCard
9. Variometer
10. G-Meter with Max-Negative stored
11. Timers: up to 3 timers with GPS UTC Clock
12. Checklist loaded from SDCard

Requirements

• Supported Display Devices are 2.8 and 2.1:
• https://www.waveshare.com/wiki/ESP32-S3-Touch-LCD-2.8C
• https://www.waveshare.com/wiki/ESP32-S3-Touch-LCD-2.1
• Barometer Device: BMP280 or similar
• Flashing tool: https://www.waveshare.com/wiki/Flash_Firmware_Flashing_and_Erasing
• Case: you can find the STL on wiki
• GPS: any TTL NMEA GPS with $GPRMC such as uBlox NEO M6N and up
• SDCard max 32gb

Installation

Please read the installation Wiki: to make it working the aircraft profile shall be correctly loaded in the setup.
We added a "vibration" correction setup: please verify with your mechanic which is the best options.

Video

• https://www.youtube.com/watch?v=gP9TrgqlwbQ
• https://www.youtube.com/watch?v=9aCub_4hdxs
• https://www.youtube.com/watch?v=8FwM3qiaDVQ
• https://www.youtube.com/watch?v=Gy3Yu2zPZRM

Flasher setup

• chip esp32s3
• flash_mode dio
• flash_size 16MB
• 0x0 bootloader.bin
• 0x10000 Application Binary
• 0x8000 partition-table.bin

If you have problems check Youtube guides and try a "full clear" during flash

COMMUNITY Edition Disclaimer

By installing or using this device and software, you acknowledge and agree to the following:

1. Risk of Use: The use of this device and software is at your own risk. The manufacturer and developers are not liable for any damage to your system, data, or any other losses arising from the installation, usage, or inability to use the device or software.
2. Warranty Disclaimer: This device and software are provided "as-is," without any express or implied warranties, including but not limited to the implied warranties of merchantability or fitness for a particular purpose. No guarantee is provided regarding the performance, functionality, or compatibility of the device and software.
3. Compliance: It is your responsibility to ensure compliance with all applicable laws, regulations, and safety standards in your region during installation and use of the device and software.
4. Liability Limitation: In no event will the manufacturer or software developer be liable for any direct, indirect, incidental, special, consequential, or punitive damages, including loss of data, business interruption, or loss of profits, arising from the use or inability to use the device or software.

Release for:

• ESP32-S3-Touch-LCD-2.8C
• ESP32-S3-Touch-LCD-2.1C
• ESP32-S3-LCD-2.8C

Bugfix

1. Gyro heading speed improvements

Known Bug

1. None

Changes

1. Gyro heading fully rewrite
2. Build process is using build machine: if it does not work contact maintainer
3. Enabled dual licensing: COMMUNITY - COMMERCIAL

Features

Warning: since the version 1.1.19 a SDCard is recommended due to resources loaded externally.

1. Customisable splash screen (image that can be displayed when ever you want)
2. GPS Speed, with KMH or KT configuration and colored arcs
3. Attitude indicator GPS Assisted
4. Altimeter with QNH settings
5. Altimeter digital with GPS Altimeter comparation
6. Slip & Turn with degree indicator
7. Gyro based on Gyroscope assisted with GPS Track
8. GPS Map based on BMP Tiles MapBox, you can load your map in the SDCard
9. Variometer
10. G-Meter with Max-Negative stored
11. Timers: up to 3 timers with GPS UTC Clock
12. Checklist loaded from SDCard

Requirements

• Supported Display Devices are 2.8 and 2.1:
• https://www.waveshare.com/wiki/ESP32-S3-Touch-LCD-2.8C
• https://www.waveshare.com/wiki/ESP32-S3-Touch-LCD-2.1
• Barometer Device: BMP280 or similar
• Flashing tool: https://www.waveshare.com/wiki/Flash_Firmware_Flashing_and_Erasing
• Case: you can find the STL on wiki
• GPS: any TTL NMEA GPS with $GPRMC such as uBlox NEO M6N and up
• SDCard

Installation

Please read the installation Wiki: to make it working the aircraft profile shall be correctly loaded in the setup.
We added a "vibration" correction setup: please verify with your mechanic which is the best options.

Video

• https://www.youtube.com/watch?v=gP9TrgqlwbQ
• https://www.youtube.com/watch?v=9aCub_4hdxs
• https://www.youtube.com/watch?v=8FwM3qiaDVQ
• https://www.youtube.com/watch?v=Gy3Yu2zPZRM

Flasher setup

• chip esp32s3
• flash_mode dio
• flash_size 16MB
• 0x0 bootloader.bin
• 0x10000 Application Binary
• 0x8000 partition-table.bin

If you have problems check Youtube guides and try a "full clear" during flash

COMMUNITY Edition Disclaimer

By installing or using this device and software, you acknowledge and agree to the following:

1. Risk of Use: The use of this device and software is at your own risk. The manufacturer and developers are not liable for any damage to your system, data, or any other losses arising from the installation, usage, or inability to use the device or software.
2. Warranty Disclaimer: This device and software are provided "as-is," without any express or implied warranties, including but not limited to the implied warranties of merchantability or fitness for a particular purpose. No guarantee is provided regarding the performance, functionality, or compatibility of the device and software.
3. Compliance: It is your responsibility to ensure compliance with all applicable laws, regulations, and safety standards in your region during installation and use of the device and software.
4. Liability Limitation: In no event will the manufacturer or software developer be liable for any direct, indirect, incidental, special, consequential, or punitive damages, including loss of data, business interruption, or loss of profits, arising from the use or inability to use the device or software.

Release for:

• ESP32-S3-Touch-LCD-2.8C
• ESP32-S3-Touch-LCD-2.1C
• ESP32-S3-LCD-2.8C

Bugfix

1. GPS Misalignment
2. Difficult access to settings
3. Map Freeze

Known Bug

1. GPS Latitude and Longitude are tested and working only with POSITIVE values

Changes

1. If you tap to NW it redirects to Attitude Indicator
2. GPS Map Tile loading animated, FASTER!
3. Bugfix Altimeter in negative values
4. GPS Map "LOADING" Label
5. Auto QNH
6. New clear colors

Features

Warning: since the version 1.1.19 a SDCard is recommended due to resources loaded externally.

1. Customisable splash screen (image that can be displayed when ever you want)
2. GPS Speed, with KMH or KT configuration and colored arcs
3. Attitude indicator GPS Assisted
4. Altimeter with QNH settings
5. Altimeter digital with GPS Altimeter comparation
6. Slip & Turn with degree indicator
7. Gyro based on Gyroscope assisted with GPS Track
8. GPS Map based on BMP Tiles, you can load your map in the SDCard
9. Variometer
10. G-Meter with Max-Negative stored
11. Timers: up to 3 timers with GPS UTC Clock
12. Checklist loaded from SDCard

Requirements

• Supported Display Devices are 2.8 and 2.1:
• https://www.waveshare.com/wiki/ESP32-S3-Touch-LCD-2.8C
• https://www.waveshare.com/wiki/ESP32-S3-Touch-LCD-2.1
• Barometer Device: BMP280 or similar
• Flashing tool: https://www.waveshare.com/wiki/Flash_Firmware_Flashing_and_Erasing
• Case: you can find the STL on wiki
• GPS: any TTL NMEA GPS with $GPRMC such as uBlox NEO M6N and up
• SDCard

Installation

Please read the installation Wiki: to make it working the aircraft profile shall be correctly loaded in the setup.
We added a "vibration" correction setup: please verify with your mechanic which is the best options.

Video

• https://www.youtube.com/watch?v=gP9TrgqlwbQ
• https://www.youtube.com/watch?v=9aCub_4hdxs
• https://www.youtube.com/watch?v=8FwM3qiaDVQ
• https://www.youtube.com/watch?v=Gy3Yu2zPZRM

Flasher setup

• chip esp32s3
• flash_mode dio
• flash_size 16MB
• 0x0 bootloader.bin
• 0x10000 Application Binary
• 0x8000 partition-table.bin

If you have problems check Youtube guides and try a "full clear" during flash

Release for:

• ESP32-S3-Touch-LCD-2.8C
• ESP32-S3-Touch-LCD-2.1C
• ESP32-S3-LCD-2.8C

Changes

1. If you tap to NW it redirects to Attitude Indicator
2. GPS Map Tile loading animated, FASTER!
3. Bugfix Altimeter in negative values
4. GPS Map "LOADING" Label

Features

Warning: since the version 1.1.19 a SDCard is recommended due to resources loaded externally.

1. Customisable splash screen (image that can be displayed when ever you want)
2. GPS Speed, with KMH or KT configuration and colored arcs
3. Attitude indicator GPS Assisted
4. Altimeter with QNH settings
5. Altimeter digital with GPS Altimeter comparation
6. Slip & Turn with degree indicator
7. Gyro based on Gyroscope assisted with GPS Track
8. GPS Map based on BMP Tiles, you can load your map in the SDCard
9. Variometer
10. G-Meter with Max-Negative stored
11. Timers: up to 3 timers with GPS UTC Clock
12. Checklist loaded from SDCard

Requirements

• Supported Display Devices are 2.8 and 2.1:
• https://www.waveshare.com/wiki/ESP32-S3-Touch-LCD-2.8C
• https://www.waveshare.com/wiki/ESP32-S3-Touch-LCD-2.1
• Barometer Device: BMP280 or similar
• Flashing tool: https://www.waveshare.com/wiki/Flash_Firmware_Flashing_and_Erasing
• Case: you can find the STL on wiki
• GPS: any TTL NMEA GPS with $GPRMC such as uBlox NEO M6N and up
• SDCard

Installation

Please read the installation Wiki: to make it working the aircraft profile shall be correctly loaded in the setup.
We added a "vibration" correction setup: please verify with your mechanic which is the best options.

Video

• https://www.youtube.com/watch?v=9aCub_4hdxs
• https://www.youtube.com/watch?v=8FwM3qiaDVQ
• https://www.youtube.com/watch?v=Gy3Yu2zPZRM

Flasher setup

• chip esp32s3
• flash_mode dio
• flash_size 16MB
• 0x0 bootloader.bin
• 0x10000 Application Binary
• 0x8000 partition-table.bin

If you have problems check Youtube guides and try a "full clear" during flash